Sega Sega Rally 2 Bedienungshandbuch PDF herunterladen (Seite 36)

8. STEERING MECHA

In order to prevent an electric shock and short circuit, be sure to turn power off

before performing work by touching the interior parts of the product.

Be careful so as not to damage wirings. Damaged wiring can cause an electric shock

or short circuit accident.

In the test mode, if the steering wheel’s VR variations are not within the allowable range, the VR installation

position adjustments or VR replacement is needed. Also, be sure to apply grease to the VR gear portion once

every 3 months.

8 - 1 REMOVING THE CONTROL PANEL

Insert the test mode, have the V.R. value displayed onthe screen.

Remove the 11 screws from the right-hand side panel Cover as shown.

Loosen the 2 screws which secure the Volume Bracket, and you can move the Volume Bracket.

Moving the Volume Bracket disengages gear mesh.

Secure the handle to the centering position and adjust gear mesh so that the volume value is within the range of

80+/-2H.

Fasten the 2 securing brackets.

Set the volume in the volume setting mode.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 127 128

Keine Kommentare

Sega Sega Rally 2 Bedienungshandbuch Seite 36