Sega Sega Rally 2 Bedienungshandbuch PDF herunterladen (Seite 57)

When intially installing the machine, or when the installa-

tion position is changed, check to see if the Test Pattern is

in the central, well balanced position. If deviated, adjust

the green position by using the Adjust Key “up/down/left/

right” in the manner so as to improve the balance (L&R,

and T&B are approximately equal as shown).

In the normal usage, with green as reference color, red

and blue are adjusted. Therefore, skip the above proce-

dure.

Press the R Key of the remote control. The red pattern

together with the green pattern are displayed on the

screen. At this time, the frame color turns into red.

By operating the Adjust Key of the remote control “up/

down/left/right”, have the center red match with that of

green. When red color is superimposed on green color, it

seems to be yellow.

Press the B Key of remote control. The blue test pattern is

added to the display on the screen. At this time, the frame

color turns into blue.

By operating the Adjsut key of the remote control “up/

down/left/right”, have the center of the blue match with

that of yellow. When blue color is superimposed on

yellow color, it seems to be white.

By pressing the WRITING KEY, have the adjustment

status stored. After it has been stored, the Adjsutment

Mode is exited automatically, and the noraml mode

returns. If the Test Key is pressed down for approximately

3 seconds without having the adjustment status stored, pre

adjustment status will remain.

The R.G.B. Keys have screen display color change

functions. Pressing the key of the color presently shown

on the screen causes the color to disappear, therefore, for

adjustment, press the key again.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 127 128

Keine Kommentare

Sega Sega Rally 2 Bedienungshandbuch Seite 57