Sega Sega Rally 2 Bedienungshandbuch PDF herunterladen (Seite 25)

INSTALLATION

OF MACHINE

7 - 6

2. In the INPUT TEST mode, check each SW and VR.

3. In the OUTPUT TEST mode, check each of lamps.

4. In the MEMORY TEST mode, check ICs on the IC Board.

Choose MEMORY TEST in the MENU mode to allow the

MEMORY test to be performed. In this test, PROGRAM

RAMs, ROMs, and ICs on the IC Board are checked.

Periodically perform the following:

1. MEMORY TEST

2. Ascertain each setting.

3. In the INPUT TEST mode, test the CONTROL device

4. In the OUTPUT TEST mode, check each of lamps.

1. In the INPUT TEST mode, check each SW and VR.

2. Adjust or replace each SW and VR.

3. If the problem can not be solved yet, check the CONTROL’s moves.

In the MONITOR ADJUSTMENT mode, check to see if the

MONITOR adjustment is appropriately made.

1. MEMORY TEST

2. In the SOUND TEST mode, check the sound related ROMs.

Check such data as game play time and histogram to adjust the

difficulty level, etc

1. Check to see that each setting is as per standard setting made

at the time of shipment.

PERIODIC

SERVICING

MEMORY

MONITOR

DATA CHECK

CONTROL

SYSTEM

7 - 10, 7 - 11

7 - 6

7 - 7

7 - 3, 7 - 4

7 - 10, 7 - l1

7 - 7

When the machine is installed, perform the following:

IC BOARD

7 - 6

TABLE 7 EXPLANATION OF TEST MODE

7 - 9

7 - 8

7 - 15

7 . EXPLANATION OF TEST AND DATA DISPLAY

ITEMS DESCRIPTION SECTIONS

When you enter the test mode, the Handlebar and Bike Body are unlocked. Do not lean against

the BikeBody when you press the test button. Failure to observe this can cause violent falling

down accidents as the Bike Body will bank. When you finish the test mode, the handlebar and

Bike Body will be locked.

In the case where plural machines are linked for communication play, if even one seat enters

the test mode, all of the linked seats will enter the test mode. Therefore, if any one of the

linked machines is in play, use care so as not to use the test mode.

The contents of the setting changes made will not be effective unless the test mode is

finished in the test mode. When the setting is changed, be sure to “EXIT” in the menu mode.

Do not press the TEST BUTTON during network check at the time of turning the power on or

exiting from the test mode. If anyone of the linked machines uses the test mode during

network check, all other Seats will continue network checking. Cause all of the Seats to

reenter the test mode and then have all of the Seats exit from the test mode simultaneously.

CAUTIONS TO BE HEEDED WHEN USING THE TEST MODE:

By operating the switch unit, periodically perform the tests and data check. When installing the machine intitally or

collecting cash, or when the machine does not function correctly, perform checking in accordance with the explanations

given in this section. The following shows tests and modes that should be utilized as applicable.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 127 128

Kommentare zu diesen Handbüchern

Keine Kommentare

Sega Sega Rally 2 Bedienungshandbuch Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Videospiele Sega Sega Rally 2