Sega Sega Rally 2 Bedienungshandbuch PDF herunterladen (Seite 71)

17 . GAME BOARD

In order to prevent an electrical shock, be sure to turn power off before

performing work by touching the interior parts of the product.

Be careful so as not to damage wirings. Damaged wiring can cause an

electric shock or short circuit accident.

Do not expose the Game BD, etc. without a good reason. In this product,

setting changes are made during the test mode. The Game BD need not be

operated. Use the Game BD, etc. as is with the same setting made at the

time of shipment.

17 -1 REMOVING THE GAME BOARD

To replace the IC Board or to change dip switch settings, take out the IC board using the following procedure;

Turn the Power off.

Remove the 2 screws and unlock to open

Side Door L.

Remove the connector from the Terminal by

loosening the 2 screws (one each on the left/

right side) which secure the connector.

Disconnect the Optic Fiber Connector.

Remove all of the connectors from inside the

cabinet.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 127 128

Keine Kommentare

Sega Sega Rally 2 Bedienungshandbuch Seite 71